table-fan (nuniesmith)ECADConfidence: Medium

the v2 board's local frame put +x the wrong way relative to the enclosure's frame, so the Gerbers showed a mirrored board: the notch would land on the wrong side, the board would run under the pot, and holes would miss the bosses; the author's note says "Don't order them.".

Impact Analysis

Persona

Electrical Engineer

Team Size Impact

5x Multiplier

Prototype Delay

3 Days

Est. Annual Cost

$30,000

1 user · 1 month240 min
Rest of team960 min
Rest of year13,200 min

monthly_minutes × 12 × team_multiplier ÷ 60 × $75/hr = $30k/yr

$75/hr assumed rate.

Annual team-minutes decomposed from the reported monthly inputs.

Evidence & Sources

1 Sources

nuniesmith/table-fan PR #19: Carrier + PSU board v2.1: fix v2's mirrored Gerbers, the Zero footprint and the buck loops

github.com

→

Analyst Notes

From the Grok pain-radar digest, Oct 25-26 2026 (Oct 25 daytime to Oct 26 morning slots). Verified live 2026-10-26: issue/PR read on GitHub; title and state confirmed.