After a shell on a tapered, filleted box, four inner corner fillet edges miss their surface by up to 0.0198 mm. SolidCraft shows the body and re-imports it without complaint; FreeCAD 1.1.4, used as an outside reader, flags the four faces as invalid.

Wrong design output reported against SolidCraft (tangency-labs)

SolidCraft (tangency-labs)MechanicalWrong design outputMedium confidence3 tools help

What engineers report

A wrong design output reported against SolidCraft (tangency-labs): produces incorrect geometry, routing, values or parts.

Recorded mode: silent wrong geometry

Analyst note

From the Grok pain-radar digest, Oct 20 2026 (7:41 AM to 9:41 AM ET slots). Verified live 2026-10-21: issue/PR read on GitHub; title and state confirmed.

What it costs a team

Modeled annual cost

$30,000

For a team of 5

Prototype delay

3 days

Modeled schedule slip per occurrence

Time lost

240 min

Per engineer per month, about 1 incidents

How the cost is modeled

240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000

A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.

Engineering tools that address it

Evidence

  1. 1tangency-labs/solidcraft Issue #3573: Shell of a tapered, filleted box: the inner corner fillets' edges lie 0.02 mm off their surface (STEP readers reject the faces)github.com

More recurring errors in SolidCraft (tangency-labs)

See all 2 SolidCraft (tangency-labs) errors

Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.