sky130-opamp's poly resistor heads fail the PDK's Magic drc(full) on two licon rules. The upstream generator fix is closed, but the repo still carries the failing cell, and opamp_core inherits 2 errors, so neither layout can be called foundry-DRC-clean. The cells were built with klt 0.7.0 while CI pins 0.8.0.

Wrong design output reported against sky130-opamp (2AMLogic)

sky130-opamp (2AMLogic)Simulation & verificationWrong design outputMedium confidence

What engineers report

A wrong design output reported against sky130-opamp (2AMLogic): produces incorrect geometry, routing, values or parts.

Recorded mode: validation / failure

Analyst note

From the Grok pain-radar digests, Nov 13-14 2026 (Nov 13 10:41 AM ET through Nov 14 7:41 AM ET digests plus the Haitch editions). Verified live 2026-11-14: issue/PR read; title and state confirmed.

What it costs a team

Modeled annual cost

$30,000

For a team of 5

Prototype delay

3 days

Modeled schedule slip per occurrence

Time lost

240 min

Per engineer per month, about 1 incidents

How the cost is modeled

240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000

A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.

Engineering tools that address it

No engineering tool profile lists this error yet. Browse tools that connect to sky130-opamp (2AMLogic).

Evidence

  1. 12AMLogic/sky130-opamp Issue #281: Clear the Magic resistor-head DRC failure in opamp_comp now that klayout-tools#3077 is closedgithub.com

Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.