sky130-lvds-tx's pad cell instantiates its ESD diode with area 400x the model default, so at 1.25 V it shunts 107.4 mA against 268.6 uA at default. The earlier driver bench had to leave the real pad out of the deck and 'argue DC equivalence' instead. Everything measured 'at the pad' is blocked or quietly wrong.

Wrong design output reported against sky130-lvds-tx (2AMLogic)

sky130-lvds-tx (2AMLogic)Simulation & verificationWrong design outputMedium confidence

What engineers report

A wrong design output reported against sky130-lvds-tx (2AMLogic): produces incorrect geometry, routing, values or parts.

Recorded mode: validation / failure

Analyst note

From the Grok pain-radar digests, Nov 13-14 2026 (Nov 13 10:41 AM ET through Nov 14 7:41 AM ET digests plus the Haitch editions). Verified live 2026-11-14: issue/PR read; title and state confirmed.

What it costs a team

Modeled annual cost

$30,000

For a team of 5

Prototype delay

3 days

Modeled schedule slip per occurrence

Time lost

240 min

Per engineer per month, about 1 incidents

How the cost is modeled

240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000

A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.

Engineering tools that address it

No engineering tool profile lists this error yet. Browse tools that connect to sky130-lvds-tx (2AMLogic).

Evidence

  1. 12AMLogic/sky130-lvds-tx Issue #100: design: pad_cell ESD diode area is 400x the model default and shunts 107 mA at 1.25 V DCgithub.com

More recurring errors in sky130-lvds-tx (2AMLogic)

See all 3 sky130-lvds-tx (2AMLogic) errors

Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.