jumpstart-3d (MaxSikorski) errors

3 recurring problems engineers report in jumpstart-3d (MaxSikorski), ranked by impact.

#176 by errors trackedMCAD

Recurring jumpstart-3d (MaxSikorski) errors, by impact

  1. 1Auto hollow on a 2 mm wall oval capsule came out as thin as 0.9 mm on the rounded sides with the slice method, and the offset method 'pinches into a broken solid that still measures right' where a curve is about as tight as the wall. It is now gated on curvature with a real wall-distance check afterward.MCAD · Agent failure · 1 report66
  2. 2Booleans between imported meshes and CAD solids in OpenCascade took 3 to 18 seconds and broke where faces touched, with one Pi lid Out box coming out with 682 broken edges.MCAD · Agent failure · 1 report66
  3. 3The nightly export judge failed after a screw-thread change. STEP and 3MF exports are clean solids, but the STL trips FreeCAD's self-intersection check at 0.65 mm on a tapped hole. The team re-pins the exact measured crossings so any larger value still fails.MCAD · Agent failure · 1 report66

How it fails

  1. Agent failure3

Sourced from public community reports. Costs and delays on individual entries are modeled estimates, not measurements.