To see if an FMC+ RAM card fits two FPGA boards, the author read the schematic sheet by sheet and wrote a script to compare 53 FPGA pins between the card schematic, the Vivado constraint files and each vendor's pin list. The review found the level shifters can turn on in the wrong direction at a 1.2 V VADJ, and the board is about 69 x 84 mm against a 69 x 76.5 mm module spec.

Recurring agent failure issue in Bow32 (thanhbinh89)

Bow32 (thanhbinh89)ECADAgent failureMedium confidence

What engineers report

A recurring agent failure problem in Bow32 (thanhbinh89) that mostly hits the electrical engineer.

Failure pattern: validation / failure

Analyst note

From the Grok pain-radar digests, Nov 8-9 2026 (Nov 8 8:41 AM ET through Nov 9 6:41 AM ET digests plus the Haitch editions). Verified live 2026-11-09: issue/PR read; title and state confirmed.

What it costs a team

Modeled annual cost

$30,000

For a team of 5

Prototype delay

3 days

Modeled schedule slip per occurrence

Time lost

240 min

Per engineer per month, about 1 incidents

How the cost is modeled

240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000

A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.

Engineering tools that address it

No engineering tool profile lists this error yet. Browse tools that connect to Bow32 (thanhbinh89).

Evidence

  1. 1thanhbinh89/Bow32 PR #13: docs: review the FMC+ DDR2/HyperRAM card, fit on the Arm MPS4 and Huins MFP-VP1902github.com

Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.