To quote a v0 board the author wrote bom_pcbway.py, which builds PCBWay and JLC BOMs, a DNP list, extras and per-part cost at 5, 10 and 100 boards from the netlist plus a parts CSV. Stock and lifecycle came from LCSC/JLCPCB APIs and DigiKey pages, TPS7A2032 has no LCSC stock, and the SOT-23 load-switch alternative needs a different footprint.
Recurring agent failure issue in sport-performance (mgiachetti)
What engineers report
A recurring agent failure problem in sport-performance (mgiachetti) that mostly hits the electrical engineer.
Failure pattern: validation / failure
Analyst note
From the Grok pain-radar digests, Nov 8-9 2026 (Nov 8 8:41 AM ET through Nov 9 6:41 AM ET digests plus the Haitch editions). Verified live 2026-11-09: issue/PR read; title and state confirmed.
What it costs a team
Modeled annual cost
$30,000
For a team of 5
Prototype delay
3 days
Modeled schedule slip per occurrence
Time lost
240 min
Per engineer per month, about 1 incidents
How the cost is modeled
240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000
A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.
Engineering tools that address it
No engineering tool profile lists this error yet. Browse tools that connect to sport-performance (mgiachetti).
Evidence
More recurring errors in sport-performance (mgiachetti)
- A KiCad schematic generated from a declarative netlist is then re-read from geometry to prove it matches, with the check now a CI step. A side detail is that the pin electrical types of all 10 symbols from easyeda2kicad came all unspecified and had to be filled in by hand.ECAD · impact 66
- EasyEDA footprints checked pad by pad against datasheets were mostly off: the Quectel LC29H had 1.8 mm pads instead of 2.5, the Qorvo DWM3000 bottom row was 0.2 mm off with no antenna keep-out, and TI TPS22916C balls were 0.18 mm against TI's 0.23. Everything redrawn from datasheets is still marked not verified.ECAD · impact 66
- The GNSS patch keep-out on L4 prohibits pour and vias but lets tracks through, so the patch power leaves through L4 from the 2.2 mm pad. A KiCad keep-out cannot filter by net.ECAD · impact 66
Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.