Three power scripts call 1.2, 0.8 and 0.5 A rated while the accepted contract says 1.7, 1.6 and 0.3 A continuous.
Recurring agent failure issue in zudo-pd (Takazudo)
What engineers report
A recurring agent failure problem in zudo-pd (Takazudo) that mostly hits the electrical engineer.
Failure pattern: validation / failure
Analyst note
From the Grok pain-radar digests, Nov 7-8 2026 (Nov 7 8:41 PM ET through Nov 8 7:41 AM ET digests plus the Haitch overnight edition). Verified live 2026-11-08: issue/PR read; title and state confirmed.
What it costs a team
Modeled annual cost
$30,000
For a team of 5
Prototype delay
3 days
Modeled schedule slip per occurrence
Time lost
240 min
Per engineer per month, about 1 incidents
How the cost is modeled
240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000
A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.
Engineering tools that address it
No engineering tool profile lists this error yet. Browse tools that connect to zudo-pd (Takazudo).
Evidence
More recurring errors in zudo-pd (Takazudo)
- A board revision lacked thermal spreading at three parts and had a decoupling cap far from its IC, and the reports were not bound to the actual copper. The PR binds current, loop, thermal and power reports to the native copper, rejects stale evidence or changed manufacturing geometry, and keeps a retired 15 V power story out of the PD20 exports.ECAD · impact 66
- Main was red on a test no CI job ran. The committed supply-capability report was last written Oct 31. Two commits on Nov 1 changed its inputs, one rewrote the power budget and one adopted new resistor and capacitor parts for Board B. The report's computed values turned out unchanged, only its two input hashes were stale, but nobody knew until someone ran the test by hand. The PR adds the gate to CI and the local pre-push script. A derived engineering report that can drift from its inputs with no alarm.ECAD · impact 66
Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.