A sitting-pose change to the Open Duck Mini v2 exposed a unit-conversion bug: axis_static divided metres by 1000 again, so shove torque came out as gravity torque alone. The polar-moment estimate used the farthest fibre at 23.6 mm against 15.3 mm true, a cable loop span sat one point off its crossings, and stop-load BLOCKERs (loads not converged, safety factors below 1.5) plus a BOM '$' column holding 'BLOCKER' stopped the totals scripts.

Wrong design output reported against Open_Duck_Mini_v2 (aaltaay)

Open_Duck_Mini_v2 (aaltaay)MechanicalWrong design outputMedium confidence

What engineers report

A wrong design output reported against Open_Duck_Mini_v2 (aaltaay): produces incorrect geometry, routing, values or parts.

Recorded mode: validation / failure

Analyst note

From the Grok pain-radar digests, Nov 10-11 2026 (Nov 10 8:41 AM ET through Nov 11 7:41 AM ET digests plus the Haitch editions). Verified live 2026-11-11: issue/PR read; title and state confirmed.

What it costs a team

Modeled annual cost

$30,000

For a team of 5

Prototype delay

3 days

Modeled schedule slip per occurrence

Time lost

240 min

Per engineer per month, about 1 incidents

How the cost is modeled

240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000

A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.

Engineering tools that address it

No engineering tool profile lists this error yet. Browse tools that connect to Open_Duck_Mini_v2 (aaltaay).

Evidence

  1. 1aaltaay/Open_Duck_Mini_v2 PR #28: V1 sit: the alert sit (A1b, D59) in the CAD and every record; feet-contact dock decision (D58)github.com

More recurring errors in Open_Duck_Mini_v2 (aaltaay)

See all 3 Open_Duck_Mini_v2 (aaltaay) errors

Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.