The robot model's base weighed 4.175 kg from the CAD shell while the BOM says 69.737 kg.
Recurring agent failure issue in openamr-platform-sw (openAMRobot)
What engineers report
A recurring agent failure problem in openamr-platform-sw (openAMRobot) that mostly hits the mechanical designer.
Failure pattern: validation / failure
Analyst note
From the Grok pain-radar digests, Nov 7-8 2026 (Nov 7 8:41 PM ET through Nov 8 7:41 AM ET digests plus the Haitch overnight edition). Verified live 2026-11-08: issue/PR read; title and state confirmed.
What it costs a team
Modeled annual cost
$30,000
For a team of 5
Prototype delay
3 days
Modeled schedule slip per occurrence
Time lost
240 min
Per engineer per month, about 1 incidents
How the cost is modeled
240 min/month × 5 engineers × 12 months = 240 hours × $125/hour = $30,000
A modeled estimate with medium confidence. Swap in your own team size and loaded rate to size it for your team.
Engineering tools that address it
No engineering tool profile lists this error yet. Browse tools that connect to openamr-platform-sw (openAMRobot).
Evidence
More recurring errors in openamr-platform-sw (openAMRobot)
- A legacy camera placeholder box from an older hardware gate still sat on top of the 2.0 base's top cover in RViz and the combined model, 0.318 m against a 0.2951 m cover.MCAD · impact 66
- The README's one command for the whole simulation still loaded a config file an earlier fix (#97) had deleted, so the sim would run with no body filtering. That fix's testing went through the other entry point and never noticed, and two READMEs had gone stale.Firmware · impact 58
Sourced from public community reports. Costs and delays are modeled estimates, not measurements. Know a better source or a fix? Tell us at hello@productflo.io.